We supply best quality instruments from EUROPEAN  brands, contact us for further details

RETI-port gamma plus
Pattern VEP + pattern ERG + flash VEP

ISCEV ERG, EOG fast and slow
mf ERG flash stimulation
mf VEP pattern stimulation

The RETI-port consists of the pattern stimulator unit and computer analyzer system. The bio signal amplifier includes a preamplifier near the patient. All patient data and the results are stored in the data base. The bio signal and averaged curves from all channels can be displayed on the monitor. In analysis mode, the system sets all markers and computes all parameters automatically.

The basic equipment already includes – in compliance with ISCEV Standard – simple and rapid determination of PVEP and PERG. The software provides automatic computation of the latencies and amplitudes.

IThe EOG program provides visualization of saccades and online analysis of amplitudes for right and left eye.

Fast Fourier transformation, OFF-line averaging, pre-trigger function are among the advanced features of the system.

Utilizing the unique short corrected m-sequence (patent registered) to generate a stimulus via a high class specially selected 21″ custom monitor (60 Hz frame time ) on a 30 degree visual field, the state of the art RETI-port gamma plus offers an objective test of the patient’s eyes to quantify the retinal response.

The stimulated areas respond in accordance with the special algorithm and deliver an individually reproducible ERGsignal for each segment (1 segment is 1 hexagon). Each cycle comprises a complete short length m-sequence and takes as little as 30 seconds for up to 61 stimulus segments and less than one minute for 103 segments. The final raw data result is derived from a freely selectable number of cycles by averaging. The artefact is detected within a selectable range and discarded automatically. A present-test run sequence may be interrupted for any reason, continued or the current cycle discarded. Additionally the RETI-port gamma plus offers the opportunity of linking to different Rodenstock scanning laser ophthalmoscopes (SLO), red stimulus or Heidelberg Retina Angiograph (HRA), blue and green stimulus, to simultaneously give a topographic and functional (electrophysiological) resultfor the visually controlled retinal area. Markers for a- and b-wave from the ERG graph are set automatically but may be set manually for each ERG to check the recorded amplitude and latency. The RETI-port gamma plus incorporates a highly sensitive four-channel amplifier with an outstanding signal-to-noise ratio. The instrument is useful for monitoring the disease process of the local retina and cortex. It is now also able to measure the visual cortex.

The RETI-port features in brief:

• Supplied with standard ISCEV programs
• User customized programs possible
• Bio Signal and average result can displayed on the screen
• Automatically artefact elimination
• All amplifier data are software-controlled
• Automated impedance test can start every time.
• Easy graphical user interface with multiple independent windows
• Offline averaging of single response
• Multifocal analysis of each signal with N1, P1 marker, 2D, 3D groups and user groups
• Many special mathematical features to calculate many different parameters,
• FFT – fast Fourier transformation to analyze steady state results,
• DSP – Digital Signal Processing filter
• Data base with backup on CDRW
• All data can export to EXCEL for statisticalö analysis
• Local area network analysis possible
• Compact interface technology in standard computers

Monitor stimulator unit :

• High quality brand industrial PC system
• 17″ color monitor, luminance 80 cd/m²; high contrast
• Pattern or strip position: full, half or quarter
• Computer calculates the check size by inputting the angles in degrees and minutes
• Contrast controlled via the computer within the range 3% – 99%
• Pattern reversal, appearance / disappearance
• For working with children, special pictures during the test

Full-field Q450:

• ISCEV Standard
• Full-field globe 400mm
• All functions fully computer-controlled
• Flash with white LED,
• Intensity Ssandard white flash 3,0 cds/m²; interval from –45dB to +5dB in step of 5
• Background 30 cd/m², 100cd/m², 450cd/m²
• Color flash and color backlight with blue LED and red LED
• ON-OFF Response possible flash time 200ms

Operating unit:

• ATX-Pentium 4 / 2,8 GHz / 80GB HDD / 256 RAM
• 3,5 “ FDD / CDRW for data base backup
• 15” TFT monitor
• Analog-digital-converter KPCI 12bit
• Printer HP 6122 or equivalent
• Keyboard, mouse
• Windows XP
• RETI-scan software

Bio signal-amplifier 4 channel:

• Type BF check-voltage 1,5 kV
• Digitally controlled amplifier
• Impedance 2 x 100 MOhm
• Noise <4µV(SS)
• Common mode reaction <110 dB
• Sensitivity 10µV/Div to 20 mV/Div
• High pass 0,02 Hz to 1 kHz
• Low pass 20 Hz to 10 kHz

RETI-port gamma

Pattern VEP + Pattern ERG + Flash VEP
ISCEV ERG, EOG Fast and Slow

The RETI port consists of the pattern stimulator unit and analyzer computer system. The bio signal amplifier includes a preamplifier near the patient. All patient data and the results are stored in the database. The bio signal and averaged curves from all channels can be displayed on the monitor. In the analyzer mode the system sets all markers and computes all defined parameters automatically.

The basic equipment already provides – in compliance with the ISCEV Standard – simple and rapid determination of PVEP and PERG. The software also ? allows computing latencies and amplitudes automatically.

In the EOG program provides visualization of saccades and online analysis of the amplitudes for right and left eye.
The Fast Fourier Transformation, OFF-Line Averaging, PreTrigger function are are among the advanced features of the system.

The RETI-port features in brief:

• Delivery with standard ISCEV programs
• User can write own different programs
• Bio signal and average result can displayed on screen
• Automatic artefact elimination
• All amplifier data are software-controlled
• Automated impedance test can start every time.
• Easy graphical user interface with multiple independent windows
• Offline averaging of single response
• Multifocal Analyze each signal with N1, P1 marker, 2D, 3D groups and user groups
• Many special mathematical features to calculate many different parameters,
• FFT – Fast Fourier Transformation to analyze steady state results,
• DSP – Digital signal Processing Filter
• Database with backup on CDRW
• All data can export to EXCEL for statistic analyze
• Allow to analyze in Local area network
• Compact interface technology in standard computers

Monitor stimulator unit :

• High quality brand industrial PC system
• 17″ color monitor, luminance 80 cd/m²; high contrast
• Pattern or strip position: full, half or quarter
• Computer calculates the check size by inputting the angles in degrees and minutes
• Contrast controlled via the computer within the range 3% – 99%
• Pattern reversal, appearance / disappearance
• For working with children, special pictures during the test

Full-field Q450:

• ISCEV Standard
• Full-field globe 400mm
• All functions fullycomputer controlled
• Flash with white LED,
• Intensity standard white flash 3,0 cds/m²; interval from –45dB to +5dB in steps of 5
• Background 30 cd/m², 100cd/m², 450cd/m²
• Color flash and color backlight with blue LED and red LED
• ON-OFF response possible, flash time 200ms

Operating unit:

• ATX-Pentium 4 / 2,8 GHz / 80GB HDD / 256 RAM
• 3,5 “ FDD / CDRW for database backup
• 15” TFT monitor
• Analog-digital converter KPCI 12 bit
• Printer HP 6122 or equivalent
• Keyboard, mouse
• Windows XP

Bio signal-amplifier 4 channel:

• Type BF check voltage 1,5 kV
• Ddigitaly controlled amplifier
• Impedance 2 x 100 MOhm
• Noise <4µV(SS)
• Common mode reaction <110 dB
• Sensitivity 10µV/div to 20 mV/div
• High pass 0,02 Hz to 1 kHz
• Low pass 20 Hz to 10 kHz

RETI-port compact is an all-embracing system for complete, visual, electrophysiological diagnostics in full compliance with ISCEV. It consists of a 2-channel Amplifier, the respective ISCEV standard and enhanced software, preset standard values, a Ganzfeld and a Stimulator Monitor. Easy handling, fast and secure detection as well as clearly arranged print-outs are guaranteed.

Examinations:
Pattern VEP | Pattern ERG | Flash VEP | ISCEV standard ERG | EOG Slow | Single response | Steady state

Stimulators:
19” TFT Screen Stimulator system, Ganzfeld Q450C Stimulator system

Amplifier:
2-channel Bio Signal Amplifier IEC 60601-1

Operating unit:

• Laptop, CDRW, Printer, mouse, Windows XP, USB 2.0
• Mobile, highly integrated USB Box (width 34,5 cm/13,59” x height 6,5 cm/2,56” x depth 31 cm/12,21”)
• Integrated 2-channel Amplifier
• Compact Table
• Integrated Stimulator system
• Power Box – isolating Transformer
• 2nd Lifting Table

Features:

• ISCEV standard examinations
• Bio Signal immediately visible on the Screen after connection of the Electrodes
• Impedance measuring and picture for Electrode placement integrated
• Automated impedance test can be started anytime
• Automatic artifact rejection
• Automatic examination flow through predefined programs
• Onscreen fixation points for children in the form of special pictures
• Automatic setting of all markers
• Marker movement possible through mouse click
• Integrated Database with CDRW Backup function
• Standard programs and normal values
• OFF-line averaging (of single response)
• Integrated FFT – Fast Fourier Transformation to constantly analyze state results
• Integrated PreTrigger function
• Integrated DSP – Digital Signal Processing filter
• Automatic calculation of the chequerboard size on the basis of recorded angle values in degrees and minutes
• Easy graphical user interface with multiple independent windows
• Analysis in local area network
• All Amplifier data are software-controlled

Options:

• Software:
  • Nystagmography
  • Contrast Sensitivity Test
  • Visual Acuity measuring
  • Automatic Calibration of Ganzfeld Stimulator and Stimulator Monitor

• Hardware:
  • Botox EMG
  • Mini-Ganzfeld
  • Additional 2-channel Amplifier

• For Ganzfeld:
  • Option X (Q450CX) – High Flash Xenon Strobe for different High Flash tests
  • Option SC (Q450SuperColor) – additional colors: royal blue, green, orange,
  • Both options combined (Q450SCX – Q450SuperColorXenon)
• Flash Goggle for Flash VEP

STATIM 5000S cassette autoclave

All you need for the mid-sized practice.

STATIM 5000S benefits

• Ultra fast 8:45 minute unwrapped cycle
• 15:30 minute wrapped cycle
• Exceptional instrument turnover
• 15 minute Dri-Tec drying technology
• Single use water
• Aseptic transfer of instrument
• Reduced instrument investment
• Gentle on instruments
• EN13060 compliant

The perfect blend of speed and capacity, the STATIM 5000S features a cycle as fast as 11 minutes with a sterilization chamber approximately three times the size of the 2000S model. This larger capacity cassette provides rapid high volume throughput sterilization with cycles up to four times the speed of common conventional autoclaves. The STATIM’s one-touch keypad offers a choice of four fully automated sterilization programs.

Aseptic transport
Similar to the STATIM 2000S, the STATIM 5000S also employs a removable cassette, allowing dental practitioners to transport sets of freshly sterilized instruments to the treatment rooms safely and aseptically.

Dri-Tec – Radiant heat drying technology
The STATIM 5000 uses heat generated by the sterilization cycle, which is ‘absorbed’ by unique drying plates located in the sterilization chamber. Heat is transferred from the drying plates directly to instruments resulting in accelerated, full load drying in as little as 15 minutes.

SciCan’s STATIM cassette sterilizers have a biological effectiveness that has been proven in tests for hollow and solid instruments at many internationally recognized institutes in Canada, the United States, and Europe.

Sterilization cycle description chart

STATIM 2000S cassette autoclave

The world’s favorite handpiece autoclave

STATIM 2000S benefits:

• Ultra fast 6:45 minute unwrapped cycle
• 10:40 minute wrapped cycle
• Exceptional instrument turnover
• 10 minute Dri-Tec drying Technology
• Single use water
• Aseptic transfer of instrument directly
• to the point-of-use
• Reduced instrument investment
• Gentle on instruments
• EN13060 compliant

The STATIM 2000S boasts an 8-minute cycle and has the added advantage of employing a fully removable chamber so you can aseptically transport a set of freshly sterilized instruments directly to the procedure area.

The STATIM 2000S is fully automatic. Simply select one of the three sterilization programs and with a single touch of the keypad, begin the cycle. An advanced microprocessor controls all functions and maintains optimal sterilization conditions, from start to finish.

SciCan’s STATIM cassette sterilizers have a biological effectiveness that has been proven in tests for hollow and solid instruments at many internationally recognized institutes in Canada, the United States, and Europe.

Dri-Tec – Convection heat drying technology
The STATIM 2000S uses convection heat to dry instruments by utilizing the remaining heat in the system after the sterilization phase. Heat is captured and released into the cassette, drying wrapped instrument loads in as little as 10 minutes.

Statim 2000S sterilization cycle description chart